深圳市歐瑞普科技有限公司成立于2011年11月24日，注冊地為深圳市寶安區石巖街道塘頭大道196號B座13樓-12樓，法定代表人為楊永洲。經營范圍包括LED原材料、LED電子產品、LED照明系列產品、LED廣告展示產品、光學產品、電子產品、電子元器件的技術開發和銷售；國內貿易，貨物和技術的進出口。(以上均不包括法律、行政法規或決定禁止并要求登記前須經批準的再生資源回收及項目。)

　　一些廠商為了降低產品成本，采用“阻容降壓”的方式給LED產品供電，這將直接影響LED燈珠的使用壽命。用開關電源(恒流源)給LED燈珠產品供電，不會影響產品的使用壽命，但是產品成本比較高。

　　5050燈珠RGB系列

　　The power of 0.2w-1.5w has good color mixing consistency, and the red light adopts double-line mode to improve product quality;

　　PPA adopts Japanese raw materials+technology, and the moisture-proof effect is the same as that of peer manufacturers, and the moisture-proof grade is MSL2a；;

　　Some anti-static measures should be taken during the production of LED lamp beads, such as grounding the workbench, wearing anti-static clothing for workers, wearing anti-wrist strap, and wearing anti-static gloves. If possible, an anti-static ion fan can be installed, and at the same time, the humidity in the workshop should be kept at about 65%, so as to prevent the air from being too dry to generate static electricity, especially the green LED lamp beads are relatively more likely to be damaged by static electricity. In addition, the antistatic ability of LEDs with different quality grades is different, and the antistatic ability of LED beads with high quality grades is stronger.

　　區分LED燈珠的方法如下:

　　1.看亮度，即驅動電流為350mA，電壓在3.0-3.6v之間時的亮度是多少，亮度越高越好。

　　2.看芯片的品牌和大小。品牌有日亞、科銳、普瑞、徐明、晶源、新世紀等。正面更好，芯片越大越好。

　　3，看BIN，也就是色溫分區和電壓BIN，越細越好。

　　4、看衰減，需要做老化測試，光衰減越小越好。

　　5.看實際應用。如果市面上有合適又便宜的鏡片和鋁基板就好了。鏡頭和鋁基板需要開的話會放更大的量，1W大功率，電流:350ma，電壓:2.8-4.0V，亮度:80-130LM，色溫:3000-12000K K。

　　深圳市歐瑞普科技有限公司嚴格執行質量管理，及時引進先進設備，加強管理，加大投入，立足本地，放眼未來，穩步發展，不斷走向全國，致力于為大眾提供值得信賴的產品和服務。